Select your language

Switch to Language

BMWcleaner software description and Adapter installation


 The PC Software can work under the any Windows 32-bit (checked on the Win2000...Win8.1) with ".NET Framework" installed, v3.5 or newer.

It also works with Windows 64-bit, but possible difficulty with drivers installation. Solution can be easy found in Google/Yandex.

Sorry, BMWcleaner Instruction is under development. Please use the MBcleaner instruction, for do the job it is absolutely same.

- Added D-CAN function to adapter hardware.
Now you can use this device to work with it as K-line/CAN diagnostic interface device for BMW.


This tool works with cars produced in 2004-2012г:

X5 E70 2006-2008

X6 E71 2008-2010

1 E82(E83) 2004-2005

3 E90-E92 2004-2008

5 E60 2003-2008

7 F10 2008-2012

7 E65 2002-2008

7 F01 2008-2012

GT F07 2008-2012



For first-time installation you will be need these files:

1. The Net Framework 1.1-3.5 - if it didn't installed yet in your PC (installer 56Mb - versions 1.1...3.5)

2. Software installer is HERE.. Caution! During installing process possible changing Disk Letter only! Please check the path of installation. Software must be installed on the root of drive, like "DiskLetter:/DenCo/SoftwareName". No other paths please.

3. Adapter driver for:

MB-CAN v1 (old type Adapter "USB K-L-Can Adapter" and Programmer V2,V3, D-CAN adapter )

MB-CAN v2 (new type Adapter "MB-CAN V2" and Programmer V4).

You can always find your adapter type in USB device properties (System->Device Manager->COM and LPT ports).

COM port number must be between COM1...COM10. It can be changed on Port Properties page.



The New Adapter activation:

1. Connect Adapter to your PC, install Adapter drivers (see above).

2. Download from this page Cleaner Installer (see above), install and run MBcleaner software. Please check the path of installation. Software must be installed on the root of drive, like "DiskLetter:/DenCo/SoftwareName". No other paths please.

3. When the Firmware Update window will be open, check addres " " on the field of Adapter firmware access path.

4. After an update, under program instructions, send the next info on the mail This email address is being protected from spambots. You need JavaScript enabled to view it.:

   1: The reason of request message.

   2: The shop order number of of this tool.

   3: The Adapter ID shown to you (the 8 CAPITAL hexadecimal symbols);

   4: Your Username (login) on this site - your profile should be filled by the correct data!

To unreasonable users: we do not need your password, the Login only!

Before sending the request, please re-read your message with "another's eyes" and correct the text so that another's person did not guess, who writes this and what he need by us.


If you had close window with Adapter ID - you always can see your Adapter ID using button "About" on the first window of the Cleaner software, or by double-clicking the left mouse button on the "Adapter" label on Updates window. How to open this window - please read the MBcleaner instruction.

5. Close the Updater Window. Wait the answer mail with next instructions.

If updates does not work - maybe your Firewall does not access the Cleaner program on this FTP,

maybe you have a not direct connection with internet (proxy as example),

or your Adapter ID is not present yet in our updates database because you did not receive yet the mail with respond by us.


The Main Window Header line shows the current Programm and Adapter SW numbers.